WaveCyber has been leading high quality and throughput automatic optical alignment assembly systems
using unique YAG shoot unit and beam sensing technologies to optical component manufacturers.
We are sorry that some old products are described in Japanese.
Optical Component Manufacturing System and Related Sub-system
| | |
|
|
Automatic Multi-Channel WDM TOSA Lens Assemby System WLC-A8
|
| |
Automatic multi-channel lens alignment and epoxy fixing equipment for 40/100G WDM TOSA.
Customized machine based on WaveCyber platform.
|
|
|
Automatic Multi-Channel WDM ROSA Lens Assemby System WLC-A7
|
| |
Automatic multi-channel lens alignment and epoxy fixing equipment for 40/100G WDM ROSA.
Capable of discrete or array lenses.
Customized machine based on WaveCyber platform.
|
|
|
Automatic Multi-channel WDM TOSA/ROSA Fiber Alignment Assembly System WLC-A3W
|
| |
Automatic fiber alignment and YAG welding equipment for multi-channel WDM TOSA/ROSA
to optimizing optical coupling based on customer’s design.
The equipment is capable for second lens and receptacle/pigtail-fiber
alignment to multi-channel lights (three-body alignment).
WaveCyber can support to find best alignment algorithm for customer’s OSA.
|
|
|
Automatic TOSA/ROSA Fiber Alignment Assembly System WLC-A3
|
| |
Automatic fiber alignment and YAG welding equipment for TOSA/ROSA/BOSA using WaveCyber unique YAG laser emission unit and laser beam sensing technology.
Maximum 5 of the equipment can share one YAG laser source using WaveCyber YAG laser branching system YBU-503.
WaveCyber has been delivered the equipment to mass-production factories mainly in China
in favorable of cost effectiveness and higher throughput.
The equipment is capable for second lens and receptacle/pigtail-fiber alignment to a laser/photo-detector (three-body alignment).
As an option, the equipment is capable for isolator mounted receptacles.
...
[ click for DETAIL/ 詳細クリック ]
|
|
|
YAG Laser Branching System YBU-503
|
| |
The system permit maximum 5 machines to share one expensive YAG laser source.
...
[ click for DETAIL/ 詳細クリック ]
|
Optical Component Test System
| | |
|
|
Laser Chip Burn-in Screening System WLC-A5/A6 [Under Development]
|
| |
Burn-in screening system for laser chips on carriers or COC’s. The system consists burn-in unit (WLC-A5) and COC mounting and test unit (WLC-A6).
Both units use the same COC test fixtures that is fully customized for COC design.
...
[ click for DETAIL/ 詳細クリック ]
|
|
|
Three-Temperature LD TO-CAN Peformance Tester WLC-A4
|
| |
独自の導光光学系の実現により従来の低温環境下での複雑な調芯照準機構が不要となり、
-40℃~90℃の複数温度ポイント下に置かれたLD及びPD素子の発光/受光特性を高速にて測定できるシステムです。
...
[ click for DETAIL/ 詳細クリック ]
|
Miscellaneous
| | |
|
|
YAG laser emission unit mounted with co-axial CCD camera
|
| |
小型軽量で、CCDカメラ観察光学系とYAGレ-ザ照射光学系は同軸
であり、照射ポイントを正確に定めることが出来ます。高性能レンズ
により高い観察倍率が実現しました。
...
[ click for DETAIL/ 詳細クリック ]
|
|
|
Circle Line Generator CV-730
|
| |
モニター中心にクロスライン(+)と同心円ライン(○)または四角ライン(□)をスーパーインポーズする
デジタル式電子ライン発生器。 FA照準及びオンライン部品検査に適合。
...
[ click for DETAIL/ 詳細クリック ]
|
|
|
Cross Line Generator HK-110
|
| |
小型多機能(白/黒十字線発生、位置調整可、NTSC/PAL対応)。 FA照準及びオンライン部品検査に適合。
...
[ click for DETAIL/ 詳細クリック ]
|
|
|
Cross and # Line Generator WXL-100
|
| |
小型多機能(十字線又は井形線発生、位置独立調整可、NTSC/PAL自動対応)。 FA照準及びオンライン部品検査に適合。
...
[ click for DETAIL/ 詳細クリック ]
|
|
■ Automatic TOSA/ROSA Fiber Alignment Assembly System WLC-A3 ■
|
|
|
Overview
|
|
|
|
- The system consists 4 parts below that make differentiations.
- Original and unique beam sensing unit to achieve short serching time for alignment
- Original and unique YAG emission unit that ensure stable and precise welding.
- Control software that works with WaveCyber YAG laser branching system to share YAG laser.
- Communication via wireless LAN make easy data acquisition.
- The system will achieve cost-effective, high quality and high throughput production.
|
|
Features
|
|
|
- Short turn around time of alignment process using original and unique beam sensing unit.
- High yield and stable laser welding sing original and unique YAG emission unit.
- Cost sharing by plural machines using WaveCyber YAG laser branching system.
- Easy data acquisition using wireless LAN.
- High yield, High throughput and cost effective mass production by automation.
- Rotation in optical alignment is capable and gives higher efficiency.
|
|
Specifications
|
|
|
WaveCyber will provide customized equipment according to requirements and component design.
Below are typical specifications.
Item | Specification |
Alignment |
Alignment sensor |
Beam sensing unit |
X-Y-Z stages | Range:15mm Resolution:0.01um |
Rotation | Range:340° |
YAG Welding | Emission unit | Co-axial optical system of YAG and CCD camera |
Tageting | Automatic |
Control Unit | Driving Current | 150mA |
Mesurement | Waelength | 1.0-1.7 um |
Part fixing | Chuck | Air |
Gimbal | Automatic surface matching |
System software | Wireless LAN Capable |
Elctric source | 100VAC/220VAC |
|
■ YAG Laser Branching System YBU-503 ■
|
|
|
Overview
|
|
|
|
- The branching system achieves lower cost by sharing expensive YAG laser source.
- It became indispensable equipment in many optical component manufacturers.
|
|
Features
|
|
|
|
- Branching to maximum 5 machines
- Dedicated software
- Standard installation in WaveCyber YAG laser welding systems
|
|
Specifications
|
|
|
Item | Specification |
Laser wavelength | 1060nm |
YAG Laser Output | Max. 150W |
In/Out-put | 3 channels per branch |
Branching | Max. 5 |
Inducing Light | Chanel independent |
Uniformity | <5% |
Branching Time | MAX: 1sec(Typical: 0.5sec) |
Control | Wireless LAN (No negotiation necessary) |
Laser emission conditions | 64 conditions |
Electricity | 100VAC 2A |
Size | 73cm(L)×67cm(H)×40cm(W) |
Weight | 50kg |
|
■ Laser Chip Burn-in Screening System WLC-A5/A6 ■
|
|
|
Overview
|
|
|
|
- Laser Cip On Ceramic (COC) burn-in screening
- Test before and after burn-in
- Two units
- Burn-in Unit (WLC-A5): Keep COC in determined condition of constant temperature and
driving current using plural COC mounted test fixtures designed according to COC structure.
- COC mounting and Test Unit (WLC-A6):Mounting COC on test fixture automatically ot manually
depending on COC and measure optical and electrical parameters automatically.
- both unit uses the same test fixture.
- In addition to I/L and I/V parameters, SMSR, wavelength and spectral-width can be measured as an option.
|
|
Specifications
|
|
|
Some of specifications are depends on COC structure.
A typical specifications are below.
Item | Specification |
Burn-in Unit | COC quantity | Depends on COC structure and power consumption Targeting 500~1000pcs |
Temperature (COC bottom) | 60~110℃ |
Temperature accuracy | ±2°C |
Driving Current | ACC 60~150mA |
Size (w/o Chiller) | 600mm(W)x600mm(D)x1300mm(H)(TBD) |
Test Unit | Temperature(COC bottom) | 20~85°C |
Temperature Acuuracy | ±0.1°C(Target) |
Current Application | Max. 150mA |
Current Accuracy | 0.15% |
Voltage Application | Max. 10V |
Voltage Accuracy | 0.10% |
Optical Power Range | -60~10dBm |
Optical Power Accuracy | 0.02dB |
optical Wavelength Range | 1.2~1.7um |
Optical Wavelength Accuracy | 0.1nm |
Test Items (Standard) |
LD:L(Po), Vf, Ir PD:Im, Idark L&I, V&I, Im&L Curve
|
Test Items (Option) |
Center wavelength, Spectral width,SMSR
|
Size (w/o Chiller) | 600mm(W)x600mm(D)x1300mm(H)(TBD) |
|
■ LD温度特性測定システム WLC-A4 ■
|
|
|
概要
|
|
|
|
- 独自の導光光学系の実現により従来の低温環境下での複雑な調芯照準機構が不要となり、
-40℃~90℃の複数温度ポイント下に置かれたLD及びPD素子の発光/受光特性を
高速にて測定できるシステムです。更にハイパワーペルチェ素子により、高精度、
高速升降温環境を実現、コンパクトな測定構造が最大限にシステムの各種指標の
測定安定性及び測定再現性を確保されます。
。
- 本装置が-40℃~90℃の各種温度ポイントで、LDモジュール(TOCANφ5.6など)の
L&I,V&I、Im&L、PD素子のIm,Idark及び
分光特性(波長、SMSRなど)を全自動で測定する事が出来ます。
- 測定対応素子
形状: |
5.6mmφCAN型(他形状別仕様) |
波長: |
0.9~1.7μm |
- 測定項目
LD: |
L(Po), Vf, Ir |
PD: |
Im, Idark |
特性曲線 |
L&I, V&I, Im&L曲線 |
スペクトル解析 |
中心波長、ピーク波長、スペクトル幅、SMSRなど |
|
|
システム構成及び規格
|
|
|
項目 | 仕様 |
冷却循環部 | ハイパワーペルチェ方式 | -40℃~90℃任意設定 |
温度制御電源 | 精度0.1℃ 470W |
冷却液循環装置 | -20℃ |
温度制御 | 範囲:-40℃~90℃ |
表示精度:±0.01℃ |
制御精度:±0.1℃ |
下降速度:室温~-40℃約8分 |
上昇速度:-40℃~90℃約10分 |
恒温箱内部露点測定 (恒温箱内部環境温湿度監視) | 温度測定精度:±0.5℃ |
湿度測定精度:±3.5(%RH) |
結露温度推算精度:±1℃ |
光学部及び恒温箱 | 16×4 LD測定治具 | -40℃~90℃任意設定 |
恒温箱 | 寸法:400W×180D×180H(mm) (突起部含まず) |
LD発光駆動電源 | 供給電源仕様 | 100VAC 2A |
-5VPDバイアス電圧電源 | PC制御 |
LD発光ドライブ電源 | 電流設定範囲:0~150mA |
設定分解能 0.2mA |
手動/自動切換方式 |
電動制御箱 | 供給電源仕様 | 100VAC 2A |
X,Z精密ステージドライブ電源 | 24V 5A |
スペクトル解析 | 市販光スペクトラムアナライザ使用 |
発光・受光特性測定 | LD素子LIV自動測定ソフト | 電圧測定精度:0.1mV |
漏れ電流測定精度:0.5nA |
光功率測定精度:1μW |
モニター電流測定精度:0.1μA |
測定時間 | 64個素子、1温度ポイントで測定時間は約5分 |
測定項目 |
LD:L(Po), Vf, Ir PD:Im, Idark L&I, V&I, Im&L曲線
|
|
■ YAGレーザー照射ユニット ■
|
|
|
概要
|
|
|
標準タイプ
スポットサイズ可変タイプ
(基準スポート径を1~3.5倍程度に任意調整)
|
- レーザー照射光学系と観察CCDカメラ光学系が同一光学軸上になるので、
YAGレーザーの照射ポイントが正確に設定できます。当社の独自の結像光学技術により、
明るさの高い光学系を可能にし、精密部品上でのYAGレーザーによる高精度の
溶接を効率よく実現します。
- 商品構成がCCDカメラ付き照射ヘッド本体、画像クロスライン発生器、
電源アタプタ(CCDカメラとクロスライン発生器共通)3点となりますので、
即座に使用可能。
|
|
特長
|
|
|
- 小型軽量ながら、CCDカメラ観察とYAGレーザー投光光学系は同軸ですから、
照射ポイントを正確に定めることが可能
- 高性能レンズにより明るさの高い光学系を実現
- 掃除しやすいカバーガラス構造設計
- ウェイブサイバー製クロスライン発生器と組み合わせ可能
|
|
主な仕様
|
|
|
項目 | 仕様 |
YAGレーザー光学系 | レーザー倍率 | 0.5倍、1.0倍、1.5倍、2.0倍(特注加工可能) |
最大パワー | 100ワット(ハイパワー特注加工可能) |
使用距離 (ワーキング・デイスタンス) | WD=33~75mm(特注加工可能) |
カバーガラス | 交換可能(消耗品) |
観察光学系 | 観察倍率 | 1/3インチCCDカメラの場合、9インチのモニターで約40倍(特注加工可能) |
CCDカメラ | 白黒/カラー指定可 |
照明 | 50LUX(オフィスの標準照明)以上の照明、 補助リング照明がオプション選択対応 |
口金 | 各社ファイバーコネクタに対応可能(特注加工可能) |
サイズ | 215(L) x 98(D) x 44(H)mm |
|
■ クロスライン発生器 HK-110 ■
|
|
|
概要
|
|
|
前パネル
|
- コンポジットビデオ信号に十字ラインをスーパーインポーズするディジタル式ライン発生器です。
- CCDカメラ照準用またはローコストの位置決め用マーカーとして利用できます。
- 各ラインの位置は後ろパネルにあるデジタルスイッチにて設定します。
|
|
主な仕様
|
|
|
項目 | 仕様 |
映像入力 |
NTSC制式コンポジット信号 |
1.0Vp-p |
75Ω |
PAL制式(選択可)コンポジット信号 |
1.0Vp-p |
75Ω |
|
映像出力 |
入力映像に対応 |
ライン位置 |
縦、横各256ポジション設定可 |
ライン色 |
白又は黒の2色 |
電源 |
6~8DCV 最大150mA(内+、外-) |
動作温度 |
‐10℃~70℃ |
外形寸法 |
100mm(W)×140mm(D)×40mm(H) |
重量 |
0.2kg |
|
■ クロス/井形ライン発生器 WXL-100 ■
|
|
|
概要
|
|
|
|
- コンポジットビデオ信号に十字線または井形線をスーパーインポーズするディジタル式ライン発生器です。
- CCDカメラ照準用またはローコストの位置決め用マーカーとして利用できます。
- 各縦、横ラインの位置はロータリエンコーダにて設定します。
|
|
主な仕様
|
|
|
項目 | 仕様 |
映像入力 |
NTSC/PAL制式信号自動認識 |
NTSC制式コンポジット信号 |
1.0Vp-p |
75Ω |
PAL制式(選択可)コンポジット信号 |
1.0Vp-p |
75Ω |
|
映像出力 |
入力映像に対応 |
ライン位置 |
NTSC制式の場合 |
水平640ライン、垂直510ライン |
PAL制式の場合 |
水平640ライン、垂直610ライン |
|
ライン色 |
白又は黒の2色 |
電源 |
DC7~9V(内+、外-) 250mA |
動作温度 |
‐10℃~70℃ |
外形寸法 |
200mm(W)×160mm(D)×56mm(H) |
重量 |
約760g |
|
page top
product DETAIL top